Table of Contents
You might be shocked to see a flood in your decorated bathroom due to a toilet leakage issue. You should immediately turn off the water supply of your toilet fixtures to stop this excessive water flow.
There are plenty of water valves installed in every showering room. You might pull out the wrong water source and make the situation worse. It is important to investigate the dedicated water source of your toilet seat to fix its problems.
Apart from shutting off the water source, you must drain the toilet bowl to work on it freely. You can follow our easy instructions to fix your toilet problems with a DIY approach. Let’s find out how our experts make this tricky process easier for you.
How to Turn Off Water to Toilet?
The water supply valve of your toilet tank can be turned off from multiple spots. Of course, a dedicated water valve is connected right behind your toilet bowl, which can be switched off on any leakage issue.
You can also approach the main water supply line and shut off all the water sources for your bathroom fixtures from this spot. If nothing works for you, you can take the lid off the toilet tank to stay upright.
You can easily drain the entire water from your toilet tank with the help of these simplest ways.
Turning Off the Toilet Water Valve – 3 Simple Methods
If you find anything wrong with your toilet seat or other plumbing fixtures, you should immediately turn off the toilet water valve. Even if you are facing a leakage issue and your toilet fill valve won’t shut off, your main water supply tank will empty soon.
To overcome this scenario, you should learn the best way to turn water value off. Actually, there is not only one source of water coming to your toilet tank; you can stop it on various spots to protect it from this water leakage issue.
Here we have explained the easiest possible ways to perform this task with minimum tools. Before jumping into the actual process, first, gather the following tools and materials:
What You’ll Need
- WD-40 Lubricant
- Wrench for Shut-Off Valves
- Screwdriver
- Narrow Wood
- Hairdryer
Method 1. Switch Off the Toilet Valve Manually
Turning its dedicated valve is one manual way to shut off water to the toilet. You can close this water valve with a wrench or with your hand.
You need to lock this toilet supply valve securely to discourage any leakage issue from this toilet seat or even its tank filled with water. Let’s get on this method in short steps:
- Initially, you have to locate this toilet water supply valve.
- This valve is usually located right behind your water tank on the wall or the left side of your toilet seat on the floor.
- Now, you can turn off the water to the toilet tank and stop the water flow from this spot.
- Start turning this valve in a counterclockwise direction, and you are sure you have securely tightened it. You can tighten it an extra quarter to completely shut it off.
- If you notice any water left in a toilet bowl, you must flush it out to work on this bathroom fixture easily.
Method 2. Shutting Off the Main Water Supply Valve
Sometimes, the dedicated toilet seat valve can stop the water flow due to any broken fixture or excessive water leakage problem. In this case, you should approach your main water supply line straightaway to save the water from this waste.
Again, this technique is made easier for beginner DIYers:
- If you reside in a colder climate, there is a certain chance that this main water supply line is controlled in your basement.
- However, if you live in a warmer place, you need to find this water supply valve somewhere outside your living area.
- You may notice one or two wheel handles directly connected to your main water supply line.
- You need to shut these wheels off to stop your home’s entire water flow.
- Sometimes, there is a dedicated bathroom valve for its fixtures; in this case, you should only turn this valve off.
- Yet again, turn this valve in a clockwise direction with a wrench to turn it off this valve.
Method 3. Propping up the Float Lever
If both the methods mentioned above did not work for you, instead of approaching the toilet shut-off valve, you could prop up the float lever of your toilet to stop the water flow.
Let’s quickly go through its easy steps as well to increase your knowledge:
- The flushing system of your toilet bowl works with the help of a floating lever. You can take the lid out of your toilet bowl to access this lever.
- Use any wooden strip of a longer length to hold it up.
- Now drain all the water by flushing the toilet; if you notice any water left in this bowl, you can remove it with any dry sponge.
- Finally, remove the main board and refill the tank to check for any water leakage issues.
How Do I Turn Off the Water to My Toilet?
After learning three easy toilet water shut-off valve methods, you should now familiarize yourself with your home toilet valves. It will also help you fix some other toilet leakage issues.
If you find another toilet problem, then at least you have an exact idea about the different locations of other valves. You can also reduce local plumber costs with a DIY attitude for these easy bathroom fixtures.
Some industrial professionals will charge so high, especially in fixing toilet issues. You should adopt any of the above techniques according to the structure of your home toilet valve.
Whether your toilet is connected with the main water supply or has a separate bathroom valve, you have both options in this informative guide.
You can easily perform this task if you have an accurate wrench for your toilet shutoff valve or main water supply controller with WD-40 lubricant.
How to Drain a Toilet After Turning Off the Water?
If you have already shut off your toilet water, it’s your responsibility to completely drain your toilet’s water tank to work on it. Sometimes, there is a toilet without a tank; in this case, you still need to empty the toilet bowl to stop the water flow.
The hose pipe helps to you eliminate this water. You can also soak the extra water with a sponge and squeeze it from the toilet bowl.
It is important to drain this water as you did with the bathroom sink shut-off valve and drain the remaining water in those pipes. If any amount is left in your toilet tank, you can get rid of it and check again.
Sometimes there is a water leakage issue in these bowls, and you may not realize it. Ensure that every fixture of this toilet tank is working smoothly.
FAQs – Frequently Asked Questions
Is it Ok to Turn Off the Water Supply to a Toilet?
If you notice any leakage issue from your toilet fixture or its water source pipe, you must immediately turn the water supply off from all the sources.
Where is the Shut-Off Valve on a Toilet?
The shutoff valve of your toilet is mostly located to the bottom left of your toilet seat. A pipe comes from your toilet tank and connects directly to its behind the wall.
Sometimes this pipe is connected to the floor so you can find this toilet valve on any of these two spots.
How Do I Turn the Water Off to My Toilet without a Shut-Off Valve?
Your toilet seat is not connected to only one water source. You can approach your main water supply line. A dedicated water valve is sometimes installed to stop the water supply only to your bathroom fixtures.
You can shut off any of these sources to stop the water supply to your toilet.
Do All Toilets Have a Water Shut-Off Valve?
Of course, all the toilets must contain a water shut-off valve to control this bathroom fixture’s water supply. For the convenience of toilet consumers, you may find a dedicated water valve or the main line valve to control the water supply.
Why is My Toilet Still Running with the Water Off?
Most professionals recommend shutting off your toilet seat’s water valve for at least a quarter more to turn off this water valve completely.
There might also be some water leakage issue in your toilet tank, which may cause the water to run out even after shutting off its valve.
Final Thoughts
Turning the water supply off to the toilet tank is easy with our three simplest approaches. You can follow our recommended instructions in any of your preferred ways to stop the water supply from leakage or any other serious issue.
You don’t need to call your local plumber for this assistance. This water supply valve is located right behind your toilet tank on the floor or wall.
You need to rotate it multiple times and tighten it up to stop the water supply completely. There is, of course, a main water supply spot or a dedicated valve only for your bathroom fixtures.
You can approach them too to stop your toilet water supply. Must remember that most of these valves have lever handles, and you have to turn them in a clockwise direction to stop this water flow.