Table of Contents
The shower is the place a person goes to clean themselves. However, suppose an extremely dirty shower filled with dirt and grime. In such cases, no person would want to take a bath there, let alone enter it.
Thus, it is necessary to clean the shower often to keep it untainted and spotless. Nevertheless, many people may end up with an exceedingly dirty shower. This article is precisely for them. The best solution is to use an automatic shower cleaner.
Nonetheless, let us deliberate on and discuss a few other professional cleaning ideas and methods to get the extremely dirty shower spotless effortlessly.
Tools needed for an extremely dirty shower cleaning:
Tools or equipment to clean their respective sections of the shower consists of:
1. Fiberglass Shower
- Soft or gentle bristle brush
- Towel
- Squeegee or sponge
2. Tile Shower
- Soft or gentle bristle brush
- Grout brush
- Squeegee or sponge
- Toothbrush (optional)
3. Stone Shower
- Soft towel
- Sponge
- Microfiber fabric or cloth (optional)
4. Glass Shower Doors
- Non-scratch and non-abrasive sponge
- Spray bottle
- Soft toothbrush
- Microfiber fabric or cloth
5. Showerhead
6. Shower Drain
Materials to clean their respective sections of the shower consist of:
1. Fiberglass Shower
- Commercially-available shower cleaner
- Baking soda
- Dishwashing soap or liquid (optional)
- Vinegar (optional)
2. Tile Shower
- Commercially-available tile cleaner
- Baking soda
- Dishwashing soap or liquid
- Vinegar
3. Stone Shower
- Stone-cleaning mixture or solution
- Mild detergent or dishwashing soap or liquid (optional)
4. Glass Shower Doors
- Dishwashing soap or liquid
- Distilled white vinegar
- Baking soda (optional)
5. Showerhead
- Distilled white vinegar
- Plastic Bag
- Secure ties or rubber band
6. Shower Drain
Steps to clean an extremely dirty Fiberglass Shower
Step 1: Spray Shower with Cleaner
The first step in cleaning an extremely dirt fiberglass shower entails spraying it with hot water and then cleaning agents. The latter can encompass ready-to-use products, vinegar solution, baking soda paste, hydrogen peroxide, etc. The agent needs to spread evenly and smoothly to prevent damage and scratches over the surface.
Step 2: Let Sit and Scrub
The next step includes allowing the cleaning agent to sit for some time. Generally, 30-45 minutes suffices. It helps the cleaner penetrate the mineral deposits, mildew, soap scum, and dirt. The cleaning agent needs proper scrubbing with attention to sections with thicker grime using a non-abrasive sponge to avoid scratches.
Step 3: Rinse and Wipe Dry
The last step entails washing off the cleaning agent thoroughly using either cold or hot water. The areas with more cleaning agents, dirt, and grime you must give focus on. It may be necessary to wash more than once. Then, the shower surface must get dried to prevent dust from sticking.
Steps to Clean a Tile Shower
Step 1: Spray Shower with Cleaner
The first step of cleaning a tile shower starts with spraying the area with an appropriate cleaner. A mixture of one part vinegar and one part water suffices for this purpose. It is essential to cover every section to ensure the cleaning agent works on the grime, grout, and dirt.
Step 2: Let Sit and Scrub
Next, the cleaning agent sprayed on the tiles should get allowed to sit for some time. Then, they should get scrubbed using a grout or soft bristle brush, focusing on the intersections. In addition, it is crucial to ensure that the movements are not rough to prevent scratches and damage.
Step 3: Rinse and Wipe Dry
After that, the cleaning agent should get rinsed off thoroughly using hot or lukewarm water. A high jet spray works best in getting the cleaner off the tiles. Then, it is essential to wipe the shower dry to prevent any dirt and dust from sticking or accumulating on the tiles.
Step 4: Clean the Grout
It is essential to clean the grout between the tile intersections while cleaning the shower. It is possible by using a cleaner and then rinsing it off using high-jet water spray and a bristle brush. Sometimes, you may have to apply force in specific areas to clean the persistent grout.
Ideas to Clean a Stone Shower
Step 1: Apply Cleaning Solution
A stone shower can get cleaned using two different cleaning solutions. A mixture of water and a mild detergent like dish soap can get used. It can be for narrow crevices and tile intersections. Additionally, a combination of stone soap and mild detergent can get utilized for the stone surface.
Step 2: Rinse, Dry, and Maintain
The next step entails washing off the cleaning agents thoroughly using water. All sections must get covered to remove the solutions from each area in the stone shower. Then, the stone surfaces should get dried. Overall, the cleaning process must get repeated often to maintain the space in optimum condition.
How to Clean Glass Shower Doors
Step 1: Apply Cleaning Solution
Damp environments like glass shower doors can have mildew and mold growth. Thus, it is necessary to use a powerful cleaning agent to clean them. A mixture of distilled white vinegar and dish soap in equal parts helps in such cases. It should get applied evenly over the glass surface.
Step 2: Rinse, Dry, and Maintain
After that, the cleaning solution should get rinsed using water. A sponge may get used to scrub the agent while washing it off. Next, a soft cloth or a microfiber cloth should get used to dry the glass shower door. It is especially crucial to proceed carefully to prevent scratches.
Ways to Clean an Extremely Dirty Shower head
Step 1: Soak Showerhead
Cleaning a showerhead starts with soaking it entirely in a plastic bag filled halfway with distilled white vinegar. The sack should get tied to the fixture using secure ties to prevent spillage. It should get left in that state for several hours. For a brass shower head, 30 minutes suffice.
Step 2: Dry and Polish
The next step entails removing the vinegar-filled bag and cleaning the showerhead using hot water. The nozzles can get cleaned using a sharp object like a paper clip or toothpick. Then, the fixture should get dried and polished using a lint-free and soft cloth for a shiny and clean look.
How to Clean a Shower Drain
Remove Drain Cover
The first step in cleaning a shower drain encompasses removing the drain cover. It enables and facilitates the nearby dirt, dust, grime, and unclean matter to get washed away. In addition, a dirty and clogged drain cover can prevent proper cleaning. For that reason, you should remove and clean it.
Remove the Clog and Rinse
The next step includes removing all matters that can clog the drain. It can comprise soap sediments, hair, plastic, or other visible debris. Then, the area in and around the drain opening you should rinse with water. Using a high jet spray generally helps remove the sticky and persistent grime.
How to Clean Shower Curtains and Liners
There are two ways to clean shower curtains and liners. In the first method, there is no need to remove the drapes. You can spray a solution of one part vinegar and four parts water on them, rinse them using warm water, and dry them at room temperature.
The second method entails removing the curtains and liners and placing them into the washing machine unless specified otherwise. For the former, warm water and mild laundry you can use detergent. For the latter, one-fourth cup vinegar and half a cup baking soda help in thorough cleaning. Both you should get air dry.
Some Best Shower Cleaning Tools:
This tool helps clean dirt, grime, soap scum, and other build-ups. You can also use it on the wall, floor, tiles, and glass doors. It allows the user to clean without bending for a significant time.
A shower hose that can slip on the fixture is a beneficial shower-cleaning tool. It helps spray water to clean most of the sections and areas within the space with minimal splashing. Since it is detachable, you can remove and store it.
It helps rid the wobbly toilet tank of rust and dirt without using acids or harsh chemicals.
Some Common Frequently Asked Questions (FAQ)
1. How to clean an extremely dirty shower?
Cleaning an extremely dirty shower entails covering all parts of the space, including the floor, walls, doors, curtains, drains, and showerhead. The best way to clean them includes using cleaning agents.
A vinegar and water solution helps clean most areas, especially the walls, floors, tile grout, and curtains. It helps remove limescale, mold, and mildew. You should later rinse it off using warm water.
A sodium bicarbonate and water mixture you can apply on persistent grout and scrub using a grout brush. In addition, spraying the vinegar solution on it allows the mixture to bubble up and remove the grime effortlessly.
2. What is the easiest way to clean a shower without scrubbing?
Several ways exist to clean the shower without scrubbing. The best way is to use cleaning agents that can work without rubbing them on the surface.
For instance, a solution or combination of dishwashing detergent and vinegar in equal parts works well on ceramic tiles. Allow it to sit for some time to work on and wear down the dirt and grime efficiently. The mixture later you can remove or wipe off using a damp cloth.
On the other hand, a warm water and dishwashing detergent mixture you can use for stone tiles. The process remains the same.
3. How to clean a walk in shower without getting wet?
A walk-in shower you can clean without getting wet using minimal water in a small container like a cup. A toothbrush can help remove dirt and dust from the walls, tiles, and floors. The glass surfaces you can clean using a non-abrasive and soft sponge.
A vinegar and dishwashing soap paste works for areas having persistent dirt and grime. It is best to spread it with the help of a toothbrush. Then, allow it to sit for an hour or two before removing it using a damp cloth. A dry towel can help remove water trails and marks.
4. How to clean a shower with vinegar?
Vinegar of all types can help clean a shower. It aids in breaking down soap scum, dirt, grime, and persistent grout. Nevertheless, white vinegar proves best for the purpose. It does not stain surfaces and works as a potent cleaning agent.
White vinegar added to dishwashing soap or water in desired concentration, generally in equal parts, helps clean most areas and sections of the shower.
It works for the floor, walls, tiles, showerhead, glass door, and curtains. It is necessary to allow the solution to sit for some time and then rinse it using warm water or a damp cloth.
5. What are the best shower cleaning hacks?
The best shower cleaning hacks entail:
- Clean the shower while using water proof outfit to prevent getting wet unnecessarily.
- Using a two-ingredient cleaning agent made of vinegar and dishwashing soap can help remove most dirt and grime.
- A plastic bag filled halfway with vinegar can get tied to the showerhead to clean it thoroughly.
- A grout brush and bicarbonate-water mixture can help remove the persistent grout present between the tile intersections in the shower.
- A loofah can work as an alternative to a 2-in-1 brush.
- The plastic strip at the bottom of a glass shower door comes off and can get cleaned.
6. What is the best way to clean extremely dirty shower walls?
The best way to clean shower walls is by using a solution or mixture of vinegar and water in equal parts. You should spray evenly and thoroughly on all the sections and areas of the wall. Then, allowed it some time to sit. Generally, an hour suffices for the purpose.
After an hour, you can wash the cleaning solution or rinse off using warm water. Otherwise, you can also use a damp cloth for the cleaning purpose. In cases or instances where persistent grout or grime remains stuck to the walls or the tile intersections, a grout brush helps significantly.
7. The Best way to clean shower mold
Shower mold you can clean using three different cleaning solutions. For general cases, undiluted vinegar or a considerably diluted borax-water solution works. Both can remove mold thoroughly if allowed to sit for some time. None of the cleaning solutions require rinsing off. A brush you can use to clean off the mold properly.
A solution of one part bleach to 10 parts water helps for more persistent mold. However, bleach is toxic and releases detrimental fumes. Thus, the cleaning agent needs to handle it carefully and while wearing gloves. In addition, you should use it in open and well-ventilated areas only.
8. How do you deep clean a shower floor?
Vinegar with baking soda or dishwashing soap can help deep clean a shower floor. For the former, it is necessary to make a thick paste and spread it evenly over the floor. A considerably concentrated solution you can apply on the surface for the latter.
You should allow the mixture to sit for some time before scrubbing the floor with a brush to remove the grout. Then, the cleaning agents can wash the surface off with hot water.
A stone floor requires a non-acidic agent. Thus, rubbing alcohol and warm water in equal parts you can use. The process remains the same.